What is Standing Seam?

There are two types of standing seam profiles made in-house, mechanical and snaplock. Standing seam metal roofing is a specific type of concealed fastener roof style. While the panels are screwed into the purlins, they are then covered with the way panels overlap. This means that the panels interlock using a clamping or snapping system providing a weather-tight seal.

REQUEST QUOTE

Roofing Applications

Standing seam panels can give your home an amazing modern look coupled with spectacular durability. A standing seam metal roof is the ideal system for anyone looking for a more low maintenance look. The biggest draw for this product is the hidden fastener. This feature provides peace of mind for many years as you do not need to worry about washers eroding away from weather allowing for less maintenance through the years.

Standing seam often requires a minimum slope of 14 degrees. A standing seam roof is a type of metal roofing where continuous inter-chained panels run from the ridge of the roof all the way down to the eaves. The upturned edge of one panel that connects it to neighboring panels creates very notable vertical lines and a sharp, modern look. A good majority of residential standing seam roofs are designed as watershed systems, often requiring a minimum roof slope of 14 degrees or more.

Installation guide
Mechanical Seam

Mechanically seamed metal roofing is the most weather-tight roofing system. It is ideal for a flat roof and can handle pitches as low as a 1/12. It is ideal for snow and can be seamed with a single or double lock connection. With hidden fasteners, this profile provides long, bold lines for a modern look. 

NEED to have a roof seamer for this either one that they own or rent. 

Available in 24 or 26 gauge: 

  • 26-gauge has 14 ¾” coverage, 2” rib 
    • All colors  
  • 24-gauge has 18” coverage, 2” rib 
    • Only available in black, white, and dark brown. 

Two profiles available. SS200 (single flange) & SS210A (double flange)

    

Snap Lock

Our Snap Lock panel system is a concealed fastener panel installed with a floating clip system, which allows for expansion and contraction of the panel. This panel is wind rated at 130 mph, is great for snow, and is great for an accent roof as well as your whole roof. 

More information: 

  • Less maintenance due to the screws being hidden from the elements 
  • Don’t penetrate the actual panel 
  • pre-drilled/marked holes for the screws 
  • 40-year paint warranty 
  • A lot of people like to use standing seam as an accent roof such as a patio awning

Manufacturer Direct Pricing

Open to The Public

Ontime Production Guarantee

Delivery Services Available

Fast Free Estimates

Quality American Made Materials

100% American Made Steel Roofing Supplies

As a full-service trim fabricator and panel manufacturer, we are your one stop shop for any roofing and siding products. Our customer service and lead times are unbeatable with same-day pickup on many orders. Proudly producing the highest quality, full-warranty products with the best American-made steel. With our extremely competitive prices, we are happy to serve you at one of our three locations.

Our Clients Love Us

"Absolutely recommend these guys. I had them cut and bend some custom size trim and when I got it all home realized one end was too wide. Called them and they reworked the order for me no charge 👍 "

-Rhet B.

"From the office to the shop, this company is amazing with their customer service and their amazing product. Highly recommend."

-Doug W.

"The best metal roofing company we were able to get a quote from. Very friendly and helpful customer service. They ensured we got all the things needed in our quote. We love that they custom cut the panels."

-Ruth B.

"Great staff, good prices and products. Got custom metal bent on the spot. Stoked to have a metal supplier this close to home."

-Craig T.


Locations

Ogden, Utah

Payson, Utah

St. George, Utah

Terms and Conditions

Trim Handling Guide